There are many unique settings that can be used for an engagement ring. The paved compromise setting derives its name from a paved road. The ring itself is either paved or has small diamonds around the ring. With small diamonds on the surface of the ring, there is an illusion that this is the band rather than a metal band.
The diamonds in this ring are linked by small beads or very small points. This helps create the illusion that the small diamonds are independent and flow around the band. For this reason, most paved bands use white gold or platinum as the base metal. This will minimize its appearance unlike yellow gold that is in contrast and will show up clearly.
With the paving compromise setting, there may be a center stone placed on top. This stone can be a diamond, but not always. Other types of stones that can be used are emeralds and rubies. The brilliance of the paved diamonds adds to the appearance of the center stone, which is usually set with prongs, but some incorporate a bezel setting.
There are several different types of pavé setting engagement rings. There is one where the width of the ring is inlaid with diamonds. There should be no evidence from the surface that there is a metal band underneath. There are also paved bands that have several rows of diamonds. The outer rows are usually angled towards the center row, which gives a dramatic effect when looking at it. If this is done correctly, you will see a three-dimensional effect. These two types have a center stone placed between the pavement. The latter does not. While this type is usually an anniversary ring, some are turning it into an engagement ring to change tradition and save money.
The quality of the stones used will determine the price of this ring. One good thing is that most of the defects of the lower quality stones are covered due to the gap setting. Plus, the pavé share setup is a great option for those on a budget.